Shop By Brand
Login
E-Mail
Password

Nikwax Tx Direct

Nikwax Tx Direct

£8.50 Product Code: 251 Our Ref No : 42
300ml
Product Information

Adds water-repellency and revives breathability to fabrics without wicking liners.

Benefits of using this product:
> Adds / renews water repellency and revives breathability
> Prolongs the life of gear and optimises outdoor performance
> Easy to apply - can be used in a washing machine, no tumble drying required
> Will not affect cosmetic appearance
> WaterBased - environmentally friendly, biodegradable, non flammable, non hazardous
> Does not contain fluorocarbons

> Guaranteed performance for 4 years from manufacture

Ideal for:
> Clothing with drop liners
> Microporous coatings
> Gore-Tex
> Sympatex
> eVENT
> Tripple-Point Ceramic
> Microfibre fabrics
> Breathable laminates

How to apply:
> For best results remove all non-washable parts and always clean item(s) first with Nikwax® > Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing. > Shake well before use. Follow care label instructions.

Machine Wash:
> Remove all detergent build-up from the detergent dispenser.
> Place maximum of 2 clean garments in washing machine.
> Use 2 full caps (100ml) per garment.
> Run 30o synthetic cycle and slow spin.
> Do not machine wash garments if taped seams have become dislodged.*

Hand Wash (use gloves):
> Immerse 1 clean garment in 6L of hand-hot water in a bowl or sink.
> Add 1 full cap (50ml) of TX.Direct.
> Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly.
> Rinse with cold water until water runs clear.

Drying: Air dry or tumble dry on a low setting if care label allows. To maintain waterproofing always wash with Nikwax® Tech Wash®. Do not use detergents.

*Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.

When to use this product:
After cleaning and re-proofing clothing, maintain its waterproofing qualities by frequent cleaning with Nikwax Tech Wash. After 6 to 8 washes with Nikwax Tech Wash, re-apply Nikwax TX.Direct to re-proof.

Remember you don’t have to wait to dry between cleaning and re-proofing.